Texas A/S Pro Sweep 680 Bedienungsanleitung Seite 12

4. Broom
It is extremely important that mounting the accessories is done in the correct way:
1. Push the accessory right next to the intake.
2. Remove the pin, pos 7.
3. Push the attachment part of the broom into the gearbox on the machine.
4. Mount the pin again.
Changing the position of the adjustment discs, pos 8, regulates the height of the broom.
5. Before starting the engine
Before start all instructions in the engine manual must be complied with.
6. Gear box
Before use it is important to check the oil level of the
transmission. Fill oil as shown in the photo.
The transmission is attached to the broom directly.
When using the machine it is important that the pin
always points in the direction in which you drive. The
pin is positioned at the end of the clutch cable.
If you hear a ticking sound from the gear
box when it is activated, the pin points in
the wrong direction.
12