Texas A/S Pro Sweep 680 Bedienungsanleitung Seite 13

7. Use
Activate the red start/stop handle, (9.) - lock it with the handle for moving forward(10.).
Now the transmission is released and the engine may be started. Consult engine manual
-
for instructions how to start engine.
The revolutions of the engine are regulated using the throttle. (pos 11). Move the handle
forward to increase revolutions and back to decrease revolutions.
The broom is activated using the handle, pos 12. The handle is locked automatically using
the lock pin 12A.
The machine moves forward when the handle pos 10. is released. Stop the machine using
the same handle.
Reverse the machine using handle pos. 12. while handle pos. 10 is activated.
You will notice a ticking noise from the gearbox when the machine is in reverse.
-
9.
10A.
10.
13
11.
12A.
12.
13.