Fault/Remedy
Fault
Product not working even after
water is filled.
The pump works audibly but little
or hardly any water escapes, even
though enough water has been
filled.
The pump suddenly becomes
louder during operation.
Technical data
Model:
Mains adaptor:
Pump capacity:
Capacity:
Dimensions:
Distributor (no service address):
Our products are constantly being developed and improved.
For this reason, design and technical modifications are possible at any time.
Declaration of Conformity
zooplus AG hereby declares that the Neptun drinking fountain LA 80407 complies with
the guidelines 2014/30/EU, 2014/35/EU and 2011/65/EU. The declaration becomes
invalid if a change has been made to the product that has not been approved by
zooplus AG.
Munich, January 2020
zooplus AG
Neptun drinking fountain
Possible cause
Is the mains adaptor in the socket?
Check whether the filter in the pump outlet
is clogged.
Check whether the filter insert in the pump
is dirty, see "Cleaning". If necessary, clean
the entire pump.
Check the water level. If necessary, add
fresh and clear drinking water.
Neptun drinking fountain LA 80407
Input: 230 – 240 V~, 50 Hz, 40 mA
Output 12 V~, 300 mA
Q
: 0-220 L/H
max
approx. 1 litre
Ø 24.5 x 6.5 cm
zooplus AG
Sonnenstraße 15
80331 Munich
Germany
www.zooplus.com
Fault/Remedy
27