Making The Neptun Fountain Ready For Use - Zooplus Neptun Bedienungsanleitung

Making the Neptun fountain ready for use

Making the Neptun fountain ready for use
Assembling
22
5 2
1. Pull up the bowl 1, if necessary
slightly tilt it.
3
2. Remove the polystyrene ring
(see arrow). It is no longer needed
afterwards and can be disposed of.
3. Wipe the inside of the water tank 2
1
with a damp cloth to remove dust.
4. Place the pump 5 in the holder
provided on the bottom of the
water tank. The pump will hold
better if you slightly moisten the
rubber feet on the bottom of the
pump.
4 5. Put the connector 4 on the pump
outlet.
6. Put the bowl back on. Make sure
that it snaps into place correctly.
7. Insert the desired nozzle 3 into the
opening of the bowl.
Neptun drinking fountain