Philips Wet&Dry S9041/12 Bedienungsanleitung Seite 24

24
English
Cleaning and maintenance
Cleaning the shaver in the SmartClean system
(S9161/31, S9111/31 only)
Preparing the SmartClean system for use
10 After the treatment, rinse and dry your
face.Your face is now ready for the next step of
your daily skincare routine.
11 Switch off the appliance and clean the
attachment after use.
Note: The accessories supplied may vary for
different products. The box shows the accessories
that have been supplied with your product.
SmartClean system Plus has two phases: the
rinsing phase and the drying phase.
Caution: Do not tilt the SmartClean system to
prevent leakage.
Note: Hold the SmartClean system while you
prepare it for use.
Note: If you clean the shaver in the SmartClean
system once a week, the SmartClean cartridge
lasts approximately three months.
1 Put the small plug in the back of the
SmartClean system.
2 Put the supply unit in the wall socket.