Construction And Function; General Description; Scope Of Delivery; Accessories - elektroautomatik PS 5080-05 A Betriebsanleitung

1.9

Construction and function

1.9.1

General description

The electronic DC laboratory power supplies of the PS 5000 A series are especially suitable for laboratories, work-
shops, school and other educational facilities due to their compact construction in a desktop enclosure.
For remote control using a PC or PLC the devices are provided as standard with an USB slot on the rear side. The
interface are galvanically isolated from the DC output.
Series or parallel connection are possible. The DC output clamps on the front are suitable to connect soldered
cable ends, spade lugs, cable end sleeves or 4mm Büschel plugs.
All models are controlled by microprocessors. These enable an exact and fast measurement and display of actual
values.
1.9.2

Scope of delivery

1 x Power supply device
1 x 1.5 m power cord
1 x Socket adapter UK
1 x 1.8 m USB cable
1 x USB stick with software and documentation
1.9.3

Accessories

For these devices the following accessories are available:
Safety adapters Set of safety adapters (1x red, 1x black, gold covered, max. 32 A) for
later mechanical installation onto the front side DC output connectors, in
Art. no.: 10900114
order to make them not exposed to touch. The adapters are supposed
to receive 4mm safety plugs (normal or isolated).
EA Elektro-Automatik GmbH
Helmholtzstr. 31-33 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
PS 5000 A Series
www.elektroautomatik.de
ea1974@elektroautomatik.de
Page 18