LaserLiner ThermoCamera HighSense Pro Aktualisierung Und Betriebsanleitung Seite 7

ThermoCamera HighSense (Pro) UPDATE
16.7
CustomApps: OverHeating-Alarm
16.8
CustomApps: Cold-Alarm
Technical data
Frame rate
OverHeating-Alarm provides point measurement
of temperatures and emits an acoustic alarm when
the upper threshold value is exceeded. The setting for
the threshold value is displayed once the CustomApp
has been opened allowing you to set the threshold
value (section 6, Setting the alarm) to suit the
application. All other parameters have already been
set. Check the function on a hot item before
measuring the temperature. Applications include
checking temperature threshold values for heating/air
conditioning systems, for quality control in production
areas, and determining overheated areas in buildings.
Overheated electrical, mechanical or automotive
components can also be identified, for example,
brakes on lorries. To ensure stable measuring
conditions, the best option is to use a tripod.
Cold-Alarm provides point measurement of tempera-
tures and emits an acoustic alarm when the value falls
below the lower threshold value. The setting for the
threshold value is displayed once the CustomApp has
been opened allowing you to set the threshold value
(section 6, Setting the alarm) to suit the application.
All other parameters have already been set. Check
the function on a cold item before measuring the
temperature. Applications include quick identification
of areas in buildings where the temperature is too
low, monitoring inlet temperatures and checking air
conditioning systems, freezers and refrigerated
warehouses. To ensure stable measuring conditions,
the best option is to use a tripod.
ThermoCamera HighSense
9 Hz
Subject to technical alterations. (22W47)
ThermoCamera HighSense Pro
07
EN