Herunterladen Diese Seite drucken

AWT Hemlock 162-Serie Montage- Und Bedienungsanweisung Seite 22

Werbung

5
M3.5x35
Montieren Sie je nach Modell den Saunaofen und
verkabeln diesen, sowie die Beleuchtung.
Montieren und verschrauben Sie zum Schluss die
Sitze und die Rückenlehnen.
Depending on the model, mount the sauna heater
and wire it, as well as the lighting. Finally, mount
and screw together the seats and the backrests.
7
Montieren und verschrauben Sie den Rahmens der
Vorderseite zusammen mit den seitlichen
Glaselementen. Wenn der Boden ein späteres
Verkleben mit Silicon nicht zulässt montieren Sie
die Bodenwinkel ohne diese zu verschrauben.
Mount and screw the front frame together with the
side glass elements. If the floor does not allow later
gluing with silicone, mount the floor angles without
screwing them.
Aufbau - construction - 1623XL/A/B/C
6
Für den elektrischen Anschluss sind werkseitig zwei
Kabelkanäle vorbereitet:
1. vorbereiteter Kabelkanal für Standöfen
2. vorbereiteter Kabelkanal für die LED-Strips
Two cable ducts are prepared at the factory for the
electrical connection:
1. Prepared cable duct for floor-standing ovens
2. Prepared cable duct for the LED strips
8
M8x120
Montieren und verschrauben Sie die Dachelemente
wie in der Zeichnung dargestellt und ziehen Sie die
Schrauben fest.
Mount and screw the roof elements as shown in the
drawing and tighten the screws.
2
1
M3.5x35
M8x120
20

Werbung

loading