Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• The device now searches for radio
stations in the reception range and
stores them. This process can take a few
minutes. Once the station search has
finished, you can select a radio station.
• Press the function button (6) to start
the station search again if necessary.
• Briefly press the Track / Volume
button (5) to switch to the next radio
station.
• Briefly press the Track / Volume
button (4) to switch to the previous
radio station.
Volume control in this mode works in
the same way as described in 4.7 Audio
playback (via Bluetooth
5. Hands-free function
You can use the speaker as a hands-free set
for your mobile phone. For this function,
the mobile phone must be connected to the
speaker via Bluetooth
• Press the
function button (2) once to
answer an incoming call.
• • Press the function button (2) twice
to reject the incoming call.
• • If you would like to end a call, press the
function button (2) once.
8
) .
®
.
®
Note – Call quality
•To increase the call quality, make sure
that you are near the speaker with
your mobile phone during the call.
6. Manually setting the time/alarm
6.1 Manually setting the time
• Press the
function button (1) to
begin setting the time manually. The
hours display begins to flash.
• Set the following information in the
order listed:
• hour, minute
• To select the individual values, press
the Track / Volume
the Track / Volume
confirm each selection by pressing the
function button (6).
• Press the
function button (1) to exit
the settings.
• The settings will automatically close if
there is no entry for 30 seconds.
button (5) or
button (4) and
Werbung
