Hama 00173167 Bedienungsanleitung Seite 7

Note – Bluetooth
Some terminal devices require a
password in order to connect to another
Bluetooth
device.
®
•If your terminal device requests
a password for connection to the
speaker, enter 0000.
Note
•The speaker always stores the last
eight terminal devices paired.
•The speaker will automatically connect
to the last terminal device paired when
it is switched on the next time.
4.6 Automatic Bluetooth
(after successful pairing)
• Make sure that your Bluetooth
terminal device is on and Bluetooth
is activated.
• Make sure that the speaker is located
within the Bluetooth
10 metres.
• Switch on the speaker as described in 4.1
Switching on the product .
6
password
®
connection
®
-capable
®
®
range of max.
®
• After a connection has been established
automatically, the Bluetooth
indicator (13) stops flashing and is
constantly lit. An acoustic signal confirms
that connection was successful.
Note – Connection impaired
After the speaker and terminal device
have been paired, a connection
is established automatically. If
the Bluetooth connection is not
®
established automatically, check the
following:
•Check the Bluetooth
terminal device to see whether 'Pocket
Clock' is connected. If not, repeat the
steps listed under Bluetooth
•Check whether your terminal device
and the speaker are less than 10
metres apart. If not, move them closer
together.
•Check whether obstacles are impairing
the range. If so, move the devices
closer together.
mode
®
settings of your
®
pairing.
®