Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.2 Manually setting the alarm
• Set the current time as described in 6.1
Manually setting the time .
• After setting the time, press the
function button (6). The hours display
begins to flash.
• Press the Track / Volume
or the Track / Volume
select the hour for the alarm time and
confirm your selection by pressing the
function button (6). The minutes
display begins to flash.
• Repeat the process to set the minutes
for the alarm time. Confirm the selected
minutes by pressing the function
button (6).
• Then press the function button (6) to
activate/deactivate the alarm.
• Use the Track / Volume
or the Track / Volume
to select ON/OFF and thereby activate/
deactivate the alarm.
• When the alarm is activated,
in the display.
• Press the
function button (1) to exit
the settings.
• Press any button to stop the alarm.
Otherwise, it will stop automatically after
4 minutes.
7. Factory settings
To reset the speaker to the factory default
settings, proceed as follows:
• Press and hold the function button
• All settings you made are deleted.
button (5)
button (4) to
8. Care and Maintenance
Only clean this product with a slightly damp,
button (5)
lint-free cloth and do not use aggressive
button (4)
cleaning agents.
9. Warranty Disclaimer
is shown
Hama GmbH & Co KG assumes no liability
and provides no warranty for damage
resulting from improper installation/
mounting, improper use of the product
or from failure to observe the operating
instructions and/or safety notes.
(6) for about 6 seconds.
Note
•Resetting to the factory default
settings can solve some problems and
malfunctions.
•However, all settings made previously
(time, alarm times, etc.) are
permanently deleted.
9
Werbung
