Hitachi CENTRAL STATION PSC-A32MN Bedienungsanleitung Seite 8

General data
3 Connect the wiring to the terminal board of the central station.
Terminal Board
TB1 For power supply
TB2 For H-LINK transmission
CN1 ~ 3 For external input/output
4 Fix the switch box (field-supplied JIS switch box for 2 switches (with cover) (JIS C 8340)) using the accessory fixing screw
(M4 × 16 mm).
4 GENERAL DATA
Model
Outer Dimension
<W x H x D + (Built-in Part)>
Net Weight
Installation Location
Installation Method
Connected Indoor Units (Quantity)
Clock Accuracy
Ambient Temperature
Ambient Humidity
Display
Rated Power Supply
Electrical Power Consumption
3 PMML0364B rev.0 - 05/2015
Use Connection procedure
M3 screw-on terminal
Round terminal connection
Tightening torque 0.5N·m
3-pin connector
Insert connector cords (accessory)
until hearing a click.
M4 screws
(Q'ty: 4)
140 × 120 × 22 + 52.7 (mm)
0.5 kg (approx.)
Indoor
Wall built-in with
JIS switch box for 2 switches (with cover) (JIS C 8340)
160 (Max.)
± 70 seconds/month (at normal temperature)
5 ~ 35°C
35 ~ 90% (No dew condensation)
5.0" TFT colour liquid crystal display
1~, 100~240V, 50/60Hz
20W (Max.)
H-LINK (Non-pole)
Terminals for external input/output
Switch box (Field-supplied)
(JIS C8340 2 switches (with cover))
PSC-A32MN
FG
AC100 to 240V