Hama SMART PLUG Bedienungsanleitung Seite 7

4. Commissioning
The following steps are required to put the unit into operation:
• Connect the unit to a properly installed and easily accessible mains socket.
• Set the unit to pairing mode by holding the button for about 5 seconds. The LED starts flashing quickly.
4.1 Installing the Hama Smart Home app
To use of the unit's functions, you need a smartphone/tablet and the Hama Smart Home app.
Note
• The following operating systems are supported:
• iOS 16.3 or later
• Android 6.0 or later
• Download the Hama Smart Home app from the App Store (iOS) or from Google Play (Android) to
your smartphone/tablet.
• To install the app, follow the instructions on your smartphone/tablet.
• Open the app on your smartphone/tablet.
Note
• During the setup of the app, queries are made as to whether the app is allowed to access functions
of your smartphone/tablet. Allow these queries for the full functionality of the unit.
• Register to create a new account. Alternatively, log in with the access data of your existing account.
• Follow the instructions for setting up the app until you can add a new device, see Chapter 4.2
Integration into the Hama Smart Home app.
Note
• You can find a detailed description of the Hama Smart Home app and the full range of
functions in our app guide at:
www.hama.com ð article number ð Downloads ð App operating instructions
Note
Make sure that you are using the latest version of the Hama Smart Home app.
CoMMISSIoNING
5