Hama SMART PLUG Bedienungsanleitung Seite 11

Then generate an individual QR code and numerical code via the point (share via Matter).
Now follow the steps in your chosen Matter-enabled app to set up the item using the generated number
or QR code.
4.3.2 Initial integration via a third-party app
You can also use our items without first connecting them to the Hama Smart Home app. Please follow the
steps below to do so:
• Open your chosen Matter-compatible app and start the device integration process.
• Press and hold the button on the socket for approx. 5 seconds until the LED starts flashing.
• Scan the QR code on the side of the socket with the corresponding app.
Note
• Please make sure that the app you choose supports the Matter standard.
• Find out about other requirements of the provider and follow them if necessary.
CoMMISSIoNING
9