auna 10008981 Bedienungsanleitung Seite 7

Front Panel Front Panel
1. Standy/ON Switch: Press this switch to turn the unit on or off remote sensor. 1. Standy/ON Switch: Press this switch to turn the unit on or off remote sensor.
2. Receiver Singal Head 2. Receiver Singal Head
3. Speaker A/B Selector: Press this switch to select speaker A,speaker B or speaker AB. 3. Speaker A/B Selector: Press this switch to select speaker A,speaker B or speaker AB.
4. Loudness Selector: Press this switch to turn loundness on or off .
5. Headphone: Insert Headphone plug.
6. Bass+/-: Adjust the unit bass volume level.
7. Treble+/-: Adjust the unit treble volume level.
8. Volume: Adjust the unit volume level.
9. Midrange: Adjust the unit midrange volume level.
10. Balance: Adjust the unit balance volume level.
11. Phone: Select Phono input mode.
12. CD: Select CD input mode.
13. DVD: Select DVD input mode. 13. DVD: Select DVD input mode.
14. Aux: Select Aux input mode. 14. Aux: Select Aux input mode.
15. Tuner: Select TUNER input mode. 15. Tuner: Select TUNER input mode.
Rear Panel Rear Panel
1. FRONT SPEAKER (B) TERMINAL:
Connect to front speaker(B), the
impedance equal or more than 8-16 OHM.
2. FRONT SPEAKER (A) TERMINAL:
Connect to front speaker(A), the
impedance equal or more than 8-16 OHM.
3. REC AUDIO INPUT JACK: Connect to
REC signal output jack.
4. TUNER AUDIO INPUT JACK: Connect to
TUNER signal output jack.
5. AUXAUDIO INPUT JACK: Connect to
AUX signal output jack.
Brief instruction of control
6. DVD AUDIO INPUT JACK: Connect to
DVD signal output jack.
7. CD AUDIO INPUT JACK: Connect to CD
signal output jack.
8. PHONO AUDIO INPUT JACK: Connect to
PHONO signal output jack.
9. GROUND OF PHONO: Connect to ground
of phone.
10. POWER SWITCH:Turn on and off the unit
power switch.
11. AC INPUT(230V....,50Hz)
7