cecotec READYWARM 2070 MAX FORCE SMART BLACK Bedienungsanleitung Seite 8

SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the device.
Keep this instruction manual for future reference or new users.
- Ensure that the mains voltage matches the voltage specified
on the device rating label and that the plug is earthed.
- This device is designed for domestic use only and is not
intended for bars, restaurants, farmhouses, hotels, motels,
and offices.
- Check the power cable regularly for visible damage. If the
cable is damaged, it must be replaced by the official Cecotec
Technical Support Service to avoid any danger.
This symbol means "Do not cover".
-
- WARNING: to avoid overheating, do not cover the appliance.
Do not use for heating clothes.
- Unplug the cord from the power supply after switching off
the appliance. Do not pull the cord.
- Do not let the cord touch the heater while in operation.
- Do not place the appliance close to heat sources, flammable
substances, or wet surfaces where it could fall or be thrown
into water, nor allow it to come into contact with water or
other liquids. Do not use outdoors.
- Always use the device on a horizontal and stable surface.
- The appliance must not be placed immediately below a
socket.
- The product's surface will reach high temperatures during
operation. Avoid contact between the skin and the device.
- Do not use the heating appliance in the immediate vicinity of
a bath, shower, or swimming pool.
- Do not use this appliance if it has been dropped or shows
visible signs of damage.
8
READYWARM 2070 MAX FORCE SMART BLACK / WHITE