cecotec READYWARM 2070 MAX FORCE SMART BLACK Bedienungsanleitung Seite 46

ENGLISH
3. OPERATION
- Unwind the cable to its full length and place the heater on a firm, level surface in a vertical
and stable position.
- Visually inspect the air inlets and outlets to ensure that there are no obstructions.
- This heater is equipped with an anti-tip switch and can only be operated in vertical
position. If the unit is tilted or knocked, the power will be switched off automatically. When
the heater is returned to the vertical position, it will operate normally.
NOTE:
the first time you use this heater, it may give off some odour. This is normal during the first few
uses or after long-term storage. Make sure the heater is in a well-ventilated area and keep
running it until the smell disappears.
HEATER OPERATION
1. Plug the heater into a power outlet.
2. Press the ON/OFF button (Standby) to start the heater.
3. Press the Mode button to switch between fan, low mode (1000W) and high mode (2000W).
4. Press the Timer button to set the timer from 0 to 24 hours with 1 hour as the interval.
5. By pressing the "AUTO" button on the control panel, the set temperature changes from 10
to 49ºC. The heater will alternate between fan, low power and high power to maintain the
set temperature.
4. CLEANING AND MAINTENANCE
1. Before cleaning the appliance, switch it off, unplug it from the mains and allow it to cool
down (for about 30 minutes).
2. Carefully wipe the outside of the heater with a soft damp cloth and dry it thoroughly with
a dry cloth. Note: do not immerse the power cord, plug or heater in water or any other
liquid, nor pour water or any other liquid on the heater.
3. Over time, dust can accumulate. It can be removed by wiping with a damp cloth or using
the brush of your vacuum cleaner.
Make sure that the heater is dry before plugging it back into the socket.
4.
5. Any other service must be performed by an authorised service representative. Do not use
the heater if it has been damaged in any way. When the heater is not in use, store it in a
cool, dry place. Do not store it until the heater is cold.
46
READYWARM 2070 MAX FORCE SMART BLACK / WHITE