GOVECS FLEX 2.0 Bedienungsanleitung Seite 16

MAINTENANCE SCHEDULE – PRIVATE VEHICLES
The vehicle must undergo a regular inspection every 5000 km or every 12 months (whichever comes first)� The vehicle must also be
inspected after driving the first 500 km�
GOVECS FLEX RECOMMENDED MAINTENANCE SCHEDULE FOR B2C SCOOTERS
Items Frequency
0,5 5,0 10
1 Lights front/rear Inspect every 5000 km I I I
2 Light mounting Inspect every 5000 km I I I
3 Horn Inspect every 5000 km I I I
4 Indicators left/right Inspect every 5000 km I I I
5 Suspension (front) Inspect every 5000 km I I I
Inspect & lubricate
6
Front fork bearings I I I
every 5000 km
7 Brake cables Inspect every 5000 km I I I
Inspect only the first 3
8 Front fork Check during the first 3 maintenance checks and during the front fork bearings exchange
maintenances
9 Firmware version check Inspect every 5000 km I I I
10 Front/rear brake pads Inspect every 5000 km Replace if the pads thickness is less than 2�4 mm
11 Inspect every 5000 km Replace if the pads thickness is less than 1�8 mm
Front/rear brake discs
12 Inspect every 5000 km
Brake fluid I I I
13
Tire thread front & rear Inspect every 5000 km
14
Tire pressure Inspect every 5000 km I I I
15
Spokes and wheel Inspect every 5000 km I I I
16
Fenders Inspect every 5000 km I I I
17
Side stand Inspect every 5000 km I I I
18
Swingarm Inspect every 5000 km I I I
19 Bolts & screws Inspect every 5000 km I I I
20 Motor contoller screws Inspect every 5000 km I I I
21 Charger Inspect every 5000 km I I I
22 Battery mounting Inspect every 5000 km I I I
23 Seat lock Inspect every 5000 km I I I
24 Test ride Perform every 5000 km I I I
I - inspect (clean, adjust, lubricate if necessary)
NOTE:
Contact an authorised service centre for inspection�
Do not attempt to repair the scooter on your own�
30
Mileage x 1000 km
Comments
15 20 25 30 35 40 45 50 55 60
I I I I I I I I I I Check functionality
I I I I I I I I I I Check stability
I I I I I I I I I I Check functionality
I I I I I I I I I I Check functionality
I I I I I I I I I I Check for leaks
I R I I I R I I I R Replace bearings if damaged or every 20�000 km
I I I I I I I I I I Check for leaks
Check for cracks using the procedure from the Service
Manual
Check that the scooter has up-to-date firmware using
I I I I I I I I I I
the Service tool software
Replace if damaged
Replace if damaged
I I I I I I I I I I Replace once a year
Replace if tire thread depth is less than 1 mm Replace if damaged
I I I I I I I I I I Front: 2�2 bar; Rear: 2�5 bar
I I I I I I I I I I Check wheel centering, inspect for damage
I I I I I I I I I I Check stability
I I I I I I I I I I Full pivot, sensor working
I I I I I I I I I I Check stability
I I I I I I I I I I Check if all are secured, check for damage
I I I I I I I I I I Torque confirmation
I I I I I I I I I I Check functionality
I I I I I I I I I I Check stability
I I I I I I I I I I Check functionality
I I I I I I I I I I Check performance & functionality
R - replace
Not following the maintenance schedule will void warranty�
Every inspection needs to be documented�
MAINTENANCE SCHEDULE – COMPANY VEHICLES
The vehicle must undergo a regular inspection every 3500 km or every 12 months (whichever comes first)� The vehicle must also be
inspected after driving the first 500 km�
GOVECS FLEX RECOMMENDED MAINTENANCE SCHEDULE FOR B2B SCOOTERS
Items Frequency
0,5 3,5 7,0
1 Lights front/rear Inspect every 3500 km I I I
2 Light mounting Inspect every 3500 km I I I
3 Horn Inspect every 3500 km I I I
4 Indicators left/right Inspect every 3500 km I I I
5 Suspension (front) Inspect every 3500 km I I I
Inspect & lubricate
6 Front fork bearings I I I
every 3500 km
7 Brake cables Inspect every 3500 km I I I
Inspect only the first 3
8 Front fork Check the first 3 maintenances and during front fork bearings exchange
maintenances
9 Inspect every 3500 km
Firmware version check I I I
10
Front/rear brake pads Inspect every 3500 km
11
Front/rear brake discs Inspect every 3500 km
12
Brake fluid Inspect every 3500 km I I I
13
Tire thread front & rear Inspect every 3500 km
14
Tire pressure Inspect every 3500 km I I I
15 Spokes and wheel Inspect every 3500 km I I I
16 Fenders Inspect every 3500 km I I I
17 Side stand Inspect every 3500 km I I I
18 Swingarm Inspect every 3500 km I I I
19 Bolts & screws Inspect every 3500 km I I I
20 Motor contoller screws Inspect every 3500 km I I I
21 Charger Inspect every 3500 km I I I
22 Battery mounting Inspect every 3500 km I I I
23 Inspect every 3500 km
Seat lock I I I
24
Test ride Perform every 3500 km I I I
NOTE:
Contact an authorised service centre for inspection�
Do not attempt to repair the scooter on your own�
Mileage x 1000 km
Comments
10,5 14 18 21 25 28 32 35 39 42 46
I I I I I I I I I I I Check functionality
I I I I I I I I I I I Check stability
I I I I I I I I I I I Check functionality
I I I I I I I I I I I Check functionality
I I I I I I I I I I I Check for leaks
I I R I I I I R I I I Replace bearings if damaged or every 18�000 km
I I I I I I I I I I I Check for leaks
Check for cracks using the procedure from the Service
Manual
Check that the scooter has up-to-date firmware using
I I I I I I I I I I I
the Service tool software
Replace if the pads thickness is less than 2�4 mm Replace if damaged
Replace if the pads thickness is less than 1�8 mm Replace if damaged
I I I I I I I I I I I Replace once a year
Replace if tire thread depth is less than 1 mm Replace if damaged
I I I I I I I I I I I Front: 2�2 bar; Rear: 2�5 bar
I I I I I I I I I I I Check wheel centering, inspect for damage
I I I I I I I I I I I Check stability
I I I I I I I I I I I Full pivot, sensor working
I I I I I I I I I I I Check stability
I I I I I I I I I I I Check if all are secured, check for damage
I I I I I I I I I I I Torque confirmation
I I I I I I I I I I I Check functionality
I I I I I I I I I I I Check stability
I I I I I I I I I I I Check functionality
I I I I I I I I I I I Check performance & functionality
I - inspect (clean, adjust, lubricate if necessary) R - replace
Not following the maintenance schedule will void warranty�
Every inspection needs to be documented�
EN
31