Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SAFETY INSTRUCTIONS
Read the safety instructions and the operating instructions carefully before installing the
product� Depending on the product type, individual points may be omitted�
Mounting & Installation
• Ensure that the intended mounting location is suitable for the respective product (e�g� in terms of weight)�
• Securely fasten the products to the locations and surfaces recommended by the manufacturer to ensure
stability and safety�
• Ensure that the products are weatherproof when installed outdoors, e�g� protect cameras from direct sunlight or
extreme temperatures�
• Make sure that any ventilation slots are not blocked to ensure sufficient air circulation and cooling�
• Make sure that cameras, switches, etc� are installed with sufficient safety distance to flammable materials, power
sources, running water, etc�
• Assembly, commissioning and maintenance may only be carried out by authorized specialist personnel in
compliance with the relevant standards and guidelines�
Power supply & wiring
• To ensure a safe power supply, use only power supplies and cables recommended by the manufacturer�
• Make sure that the cables are properly routed and protected from tampering and damage (e�g� kinking) to avoid
power failures or short circuits (e�g� due to moisture ingress)�
• Make sure that the cables are not routed through doors, windows or other moving parts to avoid damage and
tripping hazards�
• To disconnect the system from the power supply, pull the cable only by the plug and never directly by the cable�
• When shortening flexible connection cables, use wire end ferrules�
Security
• Use strong passwords for all cameras and devices to prevent unauthorized access�
• Keep device firmware up to date to minimize security vulnerabilities�
• Protect (remote) access to the devices using secure methods such as encrypted connections or VPN�
EN
5
Werbung
