Werbung
Resolution / Résolution / Auflösung / Risoluzione / Resolucón
Measuring range / Etendue de mesure / Messbereich / Campo di misura / Campo de medida
Max. error / Erreur max. / Fehlergrenze / Error max / Error màx
Repetability / Répétabilité / Wiederholbarkeit / Ripetibilita / Repetibilidad
Max slider speed / Vitesse max / Max Verteilgeschwindigkeit / Velocity max / Velicidad màx
Display refresh rate / Nombre de mesure-s / Anzahl Messungens-s / Numero di mesura-s / Número de medidas-s
Data output / Sortie de données / Datenausgang / Uscita dati / Salida de datos
Mean power consumpt. / Consommation moyenne / Verbrauch / Consumo / Consumo
Battery life / Vie de la batterie / Batterie-Lebensdauer / Autonomia / Autonomia
Working temperature (storage) / Température de travail (stockage) / Arbeitstemperatur(Lagerung) / Temperatura
operativa (stoccaggio) / Temperatura de trabajo (almacenamiento)
Weight / Poids / Gewicht / Peso / Peso
Measuring system / Système de mesure / Messsystem / Sistema di misura / Sistema de medida
IP specification / Spécification IP / IP spezifikation / Specifica IP / Especificatión IP
Advanced functions and additional information: refer to website www.sylvac.ch
CERTIFICATE OF CONFORMITY
We certify that this instrument has been manufactured in accordance with our Quality Standard and tested
with reference to masters of certified traceability by the federal institute of Metrology.
CERTIFICAT DE CONFORMITE
Nous certifions que cet instrument a été fabriqué et contrôlé selon nos normes de qualité et en référence
avec des étalons dont la traçabilité est reconnue par l'institut fédéral de métrologie.
QUALITÄTSZEUGNIS
Wir bestätigen, dass dieses Gerät gemäss unseren internen Qualitätsnormen hergestellt wurde und mittels
Normalen mit anerkannter Rückverfolgbarkeit, kalibriert durch das eidgenössische Institut für Metrologie,
geprüft worden ist.
CERTIFICATO DI CONFORMITÀ
Con il presente si certifica che questo strumento è stato prodotto secondo il nostro standard sulla qualità e
controllato rispetto a campioni di riferibilità riconosciuta dall'instituto federale di metrologia.
CERTIFICADO DE CONFORMIDAD
Certificamos que este instrumento ha sido fabricado conforme a nuestras normas de calidad y ha sido
controlado en relación con patrónes de trazabilidad reconocida por la oficina nacional de metrología.
DESCRIPTION OF BLUETOOTH
MODULE:
®
This module is based on Nordic Semiconductor nRF8001 μBlue Bluetooth Low Energy Platform. The nRF8001 is a single chip
transceiver with an embedded baseband protocol engine, suitable for ultra-low power wireless applications conforming to
the Bluetooth Low Energy Specification contained within v4.0 of the overall Bluetooth specification. The nRF8001, used in
the current revision of ISP091201, is a production product using a RoM for the baseband protocol engine.
US/CANADA CERTIFICATION
Sylvac
m.n : S_Cal EVO
JAPAN CERTIFICATION
MEXICO CERTIFICATION
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause
interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su
operación no deseada.
Contiene modulo inalámbrico
Marca: Sylvac
Modelo: ISP091201D
IFT: RCPSYIS14-0655
Changes without prior notice
Sous réserve de toute modification
Änderungen vorbehalten
Soggetto a modifica senza preavviso
Reservados los derechos de modificación sin previo aviso
Certifications
Certifications
Certificato
Certificado
Bluetooth
Certification
®
This device contains
FCC ID: 2AAQS-ISP091201
IC: 11306A-ISP091201
TAIWAN CERTIFICATION
警語
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用
者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發
現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。
前項合法通信,指依電信法規定作業之無線電通信。低功率射頻
電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備
之干擾。
Edition : 2018.10 / 681.295.04
www.sylvac.ch
0.01 / .0005''
150 mm - 6'' / 200mm - 8'' / 300mm - 12''
100mm: 20µm
100-300mm: 30µm (DIN862)
10µm / .0005''
Bluetooth
175g / 205g / 275g
Carefully dry all mechanical parts of the instrument after contact with liquids to ensure proper operation
and avoid corrosion. Don't use aggressive products (alcohol, trichloroethylene or others) to clean plastic
Zertifikat
parts. Don't expose the instrument to direct sunlight, heat or humidity.
En cas de projections de liquides, essuyer les parties métalliques de l'instrument afin de garantir un
bon fonctionnement mécanique, et éviter les problèmes de corrosion.
Ne pas utiliser de produits agressifs (alcool, trichloréthylène, etc) pour le nettoyage des parties plastiques.
Ne pas entreposer l'instrument dans un endroit exposé au soleil, à la chaleur ou à l'humidité
Nach Kontakt mit Flüssigkeit die mechanischen Teile gut trocknen um ein einwandfreies Funktionieren zu garantieren und
Rostprobleme zu vermeiden.
Keine aggressiven Produkte (Alkohol, Trichlorethylen oder andere) für die Reinigung der Kunstoffteile benutzen.
Die Instrumente nicht an einem der Sonne, Hitze oder Feuchtigkeit ausgesetzen Ort aufbewahren.
In caso di proiezione di liquidi, asciugare le parti metalliche dello strumento in maniera di garantire un buon funzionamento
meccanico, ed per evitare i problemi di corrosione.
Non utilizzare prodotti aggressivi per la pulizia dell parti in plastico.
Non eporrere lo strumento al sole, vicino a findi di calore o all' unidità.
.
Seque cuidadosamente todas las partes metálicas del instrumento para evitar cualquier humedad y así garantizar un buen
funcionamiento mecánico y evitar óxido.
No use productos agresivos (alcohol,tricloretilo u otros) para limpiar las partes de plástico.
No guarde el instrumento en el sol, calor o humedad.
BRAZIL CERTIFICATION
Este equipamento opera em caráter secondário, isto é, não tem direito à proteção contra interferência prejudicial, mesmo de
estações do mesmo tipo e não pode causar interferência a sistemas operando em caráter primário.
SOUTH KOREA CERTIFICATION
MSIP-CRM-iNs-ISP091201
NOTICE :
Changes or modifications made to this equipment not expressly approved by Sylvac may void the FCC authorization to operate this
equipment.
NOTICE :
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two
conditions.
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE :
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his
own expense.
RADIOFREQUENCY RADIATION EXPOSURE INFORMATION :
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such
marks by Sylvac is under license. Other trademarks and trade names are those of their respective owners.
0.001 / .00005''
150 mm - 6''
100mm: 15µm
100-150mm: 20µm (DIN862)
4µm @40mm / .00015'' @1.5''
Max 2.5m/s. - 100''/s.
> 10 / s.
Bluetooth
4.0
®
2.4GHz
45 µA
Bluetooth
OFF : 8000h
®
®
ON : See Bluetooth
®
technical data
+5° to +40°C
(-10° to +60°C)
175g
Sylvac system patented
IP 67 (IEC60529)
Specifications
Spécifications
Spezifikationen
Specificazioni
Especificaciones
Maintenance
Maintenance
Unterhalt
Avviso
Mantenimiento
Werbung
