La Sommeliere VIP 195 N Bedienungsanleitung Seite 44

GB
19.Make sure the wires are fitted into the
plastic groove and mount the gasket. It's
important to check that the sealing strip
provides a tight seal all the way round.
If it does not, carefully heat the strip all
the way round using a hair dryer. Then
ease the strip slightly outwards so that it
forms a tight seal against the cabinet. Be
careful not to heat the strip so much that
it melts!
20.Dismount the door hinge bushing and
mount it on opposide side.
21.Pull the wire through the bushing before
mounting it into the door hinge hole.
22.Reverse the door again and displace it
a little on the cabinet proportion to the
botton hinge.
18