La Sommeliere VIP 195 N Bedienungsanleitung Seite 41

8. Lift the bottom sheet metal part and turn
the glass so the lock hole fits the other
ends round Ø hole concentric. Place the
sheet metal part on the glass again, and
mount the brackets onto the plastic pro-
file in each end again. Don't over tighten
the screws.
Note: The nut has to fit into the centre
groove.
9. The door has to be moved up from the
hinge.
10.Unscrew the lock pin (using the flat-hea-
ded screwdriver) and remove it.
11Pull up the lock cylinder and refit both
lock cylinder and lock pin in opposite
side.
15
GB