Profi-Partner 41163 Bedienungsanleitung Seite 27

Diagram 2:
Diagram 3:
Operation:
Shut the engine off, put the vehicle transmission in Park position and pull the emergency
break all the way.
A. Jack: Suitable for cars that chassis is above 151mm from the ground when the tyre is totally
flat.
Attention:

Operate one time without load before use. If there is abnormal, please stop using.

Anyone includes the operator coming into the bottom of vehicle is forbidden when working.

It is an emergency repair tool, not supporting device for long time.

Pay attention to waterproof measures.
Lifting vehicle:
1. Stop the car, tension the car brake.
2. Keep the switch in "O" position
3. Swing open the line winding box and remove the power cord.
4. Insert the power cord plug into the vehicle's 12V cigarette lighter. Make sure that the red LED
indicator on the plug turns on.
5. Place the jack on a flat, level and solid surface under the vehicle lifting point.
6. Align the jack pressure rod with the lifting point and rotate the adjusting screw closer to the lifting
point on the vehicle's frame.
7. Adjust the function switch to "II" position, and then press
suggested to lift the car 5cm from the floor.
The center of supporting pad
NO. NAME
1 Switches
2 Tool Box
Pressure
3
Gauge
4 Safety Valve
5 Supporting Pad
Adjusting
6
Screw
No. NAME
1 Direction Switch
2 Function Switch
3
4
5 I
6 II
7 O
. The jack will start to lift the car. It is
FUNCTION DESCRIPTION
Pls check Diagram 3
Put the tools and collect the
air hose here
Show the pressure
Unlock the pressure rod in
emergency
Support the lift vehicle
Adjust the distance of the
pressure rod and automobile
chassis
FUNCTION
DESCRIPTION
Up/Close/Down
Inflation/Close/Lift
Up
Down
Inflate car tyres
Lift
Close
GB