Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Operation
Locking
The lock can be used to lock key operation and cooking level settings. Only the ON/OFF key can be used
to switch the hob off.
Activating the lock
1. Press the lock key. The lock key will light up brightly.
The lock will now be activated.
Switching off the lock
2. Press the lock key. The lock key will light up with a dimmed light.
The lock is now switched off.
Notes:
• For safety reasons, key lock has no influence on the ON/OFF Key.
• The key for the key lock feature will also not be locked for disabling the key lock feature again.
• Key lock stays active if the cooktop is powered OFF and ON again via the ON/OFF Key
• An interruption of the power supply voltage will cancel the key lock feature.
Power boost
The power boost setting makes additional power available for induction cooking zones. A large quantity of
water can be brought to the boil very quickly.
1. Switch on the hob. Use the power setting display (as a key) to select
a cooking zone. The stand-by dot of the cooking zone selected will light
up.
2. Touch the P symbol on the slider area. The booster for the selected
cooking zone is activated. The vdisplay for the cooking zone shows a
"P".
3. Power boost function is de-activated automatically after 5 minutes.
Notes:
Press the sensor field slider to prematurely de-activate the power
boost.
Power management
For technical reasons two cooking zones (i.e. front left + rear left, or front
right + rear right) always comprise a module and have a maximum
power level to prevent the mains connection from overloading.
The power management is prioritizing, i.e. the cooking zone which
heating power has been increased at last will get the desired heating
power and the other cooking zone of the same module will be reduced in
its heating power. Additionally, the reduction of power will be signalled by
flashing.
52
Werbung
