Seiko Instruments SLP620 SLP650 Smart Label Printer SLP650 Kurzanleitung Seite 6

Changing Labels
• Tear off any printed labels so the labels are flush with the exit slot. Press and hold the
button to reverse the labels out the paper inlet slot. DO NOT pull the labels out of the
printer. Load the new roll as described at the beginning of this guide.
• To select a different label type in the Smart Label Creator, click
from the pull-down list on the Label Settings dialog (Screen shot at the following).
• The print margins can be adjusted if the printing isn't positioned properly when the label is
printed, particularly on small labels. To adjust the margins, click
Margin Adjustment on the Print dialog (Screen shot at the following).
. Select the label type
. Move the slider of
7
About Your Labels
• The SLP 620, 650, and 650SE can use any of the SmartLabels provided by Seiko Instruments Inc.
• SmartLabels are available from your local Seiko Instruments dealer or they may be ordered from
Seiko Instruments at www.sii-ps.com/slp/.
Important: For best results we recommend the use SmartLabels of Seiko Instruments Inc. Other brands
may not work correctly with your SLP, or they may damage the printer and void your warranty.
What To Do If...
Refer to your SMART LABEL PRINTER User's Guide or the on-line help if you have a problem or need
additional information when using your SLP.
To access on-line help, choose Smart Label Creator Help from the Help menu.
8
EN