Seiko Instruments SLP620 SLP650 Smart Label Printer SLP650 Kurzanleitung Seite 4

Preparing the SLP
1. Install the Smart Label Creator, then connect the printer to your PC
or Mac.
• The SLP can be connected to either the Serial or USB port on
your PC. Do not use both cables. On your Mac use the USB
port.
• Connect the other end of the cable into the appropriate port on
the back of the SLP.
2. Connect the supplied AC adapter to the back of the SLP and to a power outlet.
3. The printer powers on automatically when connected to AC
power. The Status Light will flash until the labels are loaded.
4. Lift the Roll Cover.
5. Inserting a SmartLabels.
• Remove the sticker from the roll, and then place the roll on
the spindle as illustrated. Adjust the label guides to fit
against the roll.
• Feed the labels into the paper inlet slot. The labels will
then automatically be moved into the correct position.
• Close the Roll Cover.
6. Start your SLP software and begin using your new SLP.
Label guides
3
Your First Address Label (Mac)
1. Select File - New Finder Window on Apple menu bar, click the Applications and then double-click the
Smart Label Creator.app on the folder Seiko Instruments Inc.
2. The default address label will appear (Screen shot at the following). The cursor is in a position where it
can be input the text data. You can easily input text data.
• Edit the font or text.
• To add a barcode, select .
3. Click to print the label.
4. Click to save the label
.
4
EN