Seiko Instruments SLP620 SLP650 Smart Label Printer SLP650 Kurzanleitung Seite 3

QUICK START GUIDE
Install the software, Smart Label Creator, as follows before connecting the SMART LABEL PRINTER to your
computer.
©2013-2021 Seiko Instruments Inc. All rights reserved. Specifications are subject to change without notice.
"SII" is a registered trademark of Seiko Instruments Inc. "SMART LABEL PRINTER®" is a registered
trademark and "SmartLabels™" is a trademark of Seiko Instruments USA Inc. Other brand and product
names are trademarks or registered trademarks of their respective holders.
Abbreviations used in this document are as follows:
• SMART LABEL PRINTER® → SLP
• SmartLabels™ → SmartLabels
Host Environments
• Microsoft® Windows® 8 (32 bit / 64 bit)
• Microsoft® Windows® 8.1 (32 bit / 64 bit)
• Microsoft® Windows® 10 (32 bit / 64 bit)
• macOS TM 10.13 (64 bit)
• macOS 10.14 (64 bit)
TM
• macOS 10.15 (64 bit)
TM
• macOS TM 11 (64 bit)
Hereinafter, host environments noted above are abbreviated as "Windows" or "Mac".
1
Installing the Smart Label Creator for Mac
Please download the disc image file (.dmg) from the web page (www.sii-ps.com/slp/).
Double-clicking the downloaded disc image file (.dmg) mounts it on the Mac volume. Start up the installer by
double-clicking the SII Smart Label Printer.pkg file there.
Installing the Smart Label Creator for Windows
Please download the zip file from the web page (www.sii-ps.com/slp/).
Double-click the downloaded zip file to unzip. Start up the installer by double-clicking the Setup.exe file inside
the folder.
2
EN