SOMFY 5050497A Gebrauchsanweisung Seite 21

Universal Setting Tool_5050497X00.qxd
Installation instructions
Wired electronic motor
[1]. Switch off the power supply.
[2]. Connect the universal setting tool to the
motor as shown in the wiring diagram:
a
b
c
d
[3]. Switch the power back on.
[4]. Connect the universal setting tool:
the LED 1 comes on.
[5]. Press and hold push-button 4 in the WT
position until the roller blind has moved
up and down twice:
the motor has been reset.
[6]. Press Up/Down button 2 to control the
motor's direction of rotation.
- If the direction of rotation is correct, the
motor is correctly wired.
- If the direction of rotation is incorrect,
swap the brown wire and the black wire.
[7]. Use the motor's installation instructions to
set the motor.
[8]. Disconnect the universal setting tool once
the settings have been completed.
[9]. Disconnect the universal setting tool from the motor.
Copyright © 2007 Somfy SAS. All rights reserved - V0 - 11/07
Yellow/Green
earth (W)
Blue neutral (N)
live [up] (▲)
Black or Brown
Black or Brown live [down] (▼)
22/11/07 10:19 Page 19
1
2
Universal setting tool
a c d b
3
RTS
4
WT
19