Werbung
1. Power
Touch the panel for 5 seconds to turn on the system. Touch the power key „
2. Sauna
Touch the sauna key „
3. Light
1) Touch the light key „
2) Touch the key „
3) Touch the color on the color dial „
middle of the color tray is a shortcut key for turning on white light.
4) The light color can be freely switched between manual and automatic.
4. Bluetooth
1) Touch the Bluetooth key „
2) After activating the Bluetooth function, "Sauna" will be displayed in the Bluetooth connection of the
phone. Select to connect to Bluetooth.
3) If Bluetooth is not connected, the panel displays „
4) The Bluetooth function only has music playback function, which can be controlled by pressing the
„
5) Touch the slider „
5. Temperature
The temperature area displays the current temperature, which can be set by pressing the „
When setting the temperature, the number will turn red. If there is no operation, the current temperature
will be displayed after 5 seconds.
6. Time
The maximum time setting is 90 minutes, and the display is divided into hours and minutes. The hourly
setting is ± 1, and the minute setting is ± 5, which can be set through „
setting button to speed up the time setting.
7. Troubleshooting
1) Malfunction temperature display
If the temperature display shows 0°C, this usually indicates a defective temperature probe or damage to
or disconnection of the connection cable or damage to or disconnection of the connection cable.
2) No function of the radiant heaters
The causes for this malfunction are manifold. On the one hand, an incorrect temperature display can
the radiators no longer function. If this is not the case, then the first thing to do is to check that the
radiators are correctly connected.. If there is a fault with a particular radiator. If it is a fault with a
particular radiator, this can be determined and rectified by checking the wiring. However, if all the
radiators are affected, the functionality of the control unit should be checked.
" to turn on the sauna. Touch it again to turn off the sauna.
" to turn on the light. Touch it again to turn off the light.
" to turn on automatic color.
" to activate the corresponding color. The white area in the
" to turn on the bluetooth. Touch it again to turn off the Bluetooth.
" button to play/pause, previous/next music.
Bedienfeld - Control functions
". After connecting, the icon disappears.
" to adjust the volume level.
" & „
" to turn off the system.
" & „
".
". Press and hold the
12
Werbung
