Set-Up Instructions; First Operation; Speed Selection - Gold Note T-5 Bedienungsanleitung

| SET-UP INSTRUCTIONS

CAUTION
Please pay attention while unpacking the
turntable. The tonearm and the headshell
connectors are extremely delicate and must
be handled carefully to avoid damages to
the tonearm.

FIRST OPERATION

1
Please remove carefully the protecting
foam and check if all the listed items are
supplied.
2
Place the turntable on a levelled surface.
3
Fine tune the counterweight on the
tonearm ensuring the tracking weight
matches the requirements of your
cartridge.
4
Install the drive belt around the motor
pulley first, then carefully run it around
the platter.
5
Connect the turntable to the power
outlet.
POSITIONING THE TURNTABLE
Your turntable has been designed for Hi-Fi
systems. It must be protected from direct sun
and humidity. Do not place it near heating
sources, electrical and electronic motors,
mobile phones etc. The positioning on a
solid shelf, is crucial to achieve the best
audio performances possible.

SPEED SELECTION

To change the speed, place the belt on the
appropriate groove the pulley.
See page 8 for more info.
2
EN
DE
IT
FR