Safety Information - MikroTik RB5009UPr+S+OUT Kurzanleitung

Safety Information:

 Before you work on any MikroTik equipment, be aware of the hazards involved with electrical
circuitry, and be familiar with standard practices for preventing accidents. The installer should be
familiar with network structures, terms, and concepts.
 Use only accessories approved by the manufacturer, and which can be found in the original packaging
of this product.
 This equipment is to be installed by trained and qualified personnel, as per these installation
instructions. The installer is responsible for making sure, that the Installation of the equipment is
compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the
device.
 This product is intended to be mounted outdoors on a pole. Please read the mounting instructions
carefully before beginning installation. Failure to use the correct hardware and configuration or to
follow the correct procedures could result in a hazardous situation for people and damage to the
system.
 When powering the device using a DC power adapter, the length of the DC cable shall not exceed 3
meters.
 We cannot guarantee that no accidents or damage will occur due to the improper use of the device.
Please use this product with care and operate at your own risk!
 In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging
the power adapter from the power outlet.
 This is a Class A product. In a domestic environment, this product might cause radio interference in
which case the user might be required to take adequate measures.
Manufacturer: Mikrotikls SIA, Unijas 2, Riga, Latvia, LV1039.
Note: For some models, check the user and wireless passwords on the sticker.
BG - Български. Бързо ръководство:
Това устройство трябва да бъде надстроено до най-новата версия v7.7 на софтуера, за да се
гарантира спазването на местните наредби!
Отговорност на крайните потребители е да спазват местните разпоредби на държавата.
Всички устройства MikroTik трябва да бъдат професионално инсталирани.
Това бързо ръководство обхваща модела: RB5009UPr+S+OUT.
Това е мрежово устройство. Можете да намерите името на модела на продукта на етикета
на регистъра (ID).