Werbung
Charging the Battery
Always use genuine Panasonic batteries (P6, P7, P8).
0
If you use other batteries, we cannot guarantee the quality of this product.
0
A Battery charger
B USB connection cable (supplied)
1
Connect the charger and the AC adaptor with the USB connection
cable.
Hold the plugs and insert them straight in or pull them straight out.
0
(Inserting these at an angle may cause deformation or malfunction)
2
Connect the AC cables (AC mains leads) to the AC adaptor and
then insert into the electrical outlet E.
The AC cable (AC mains lead) is dedicated for this unit. Do not use it with
0
other devices.
3
Insert the battery.
Insert the battery with its terminals facing down
0
and push.
The [CHARGE] light F blinks and charging
0
begins.
When the battery is inserted while the charger is
0
not connected to the power source, the charging
light turns on for a certain period to allow you to
confirm the battery level.
∫ [CHARGE] Light Indications
Charging
status
[CHARGE]
light
A Blinking
After charging, disconnect the power source connection and remove the battery.
0
0% to 49%
50% to 79%
B On
C AC adaptor (supplied)
D AC cable (AC mains lead)
(supplied)
80% to 99%
C Off
(ENG) DVQX2102
100%
9
Werbung
