Herunterladen Diese Seite drucken

Panasonic LUMIX DMW-BTC15 Bedienungsanleitung Seite 4

Werbung

(For the U.S.A. and CANADA)
AC adaptor
This AC adaptor operates on AC between 100 V and 240 V.
But
In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V
0
AC power supply only.
When connecting to an AC supply outside of the U.S.A. or Canada, use a
0
plug adaptor to suit the AC outlet configuration.
When connecting to a supply of greater than AC 125 V, ensure the cord
0
you use is suited to the voltage of the AC supply and the rated current of
the AC adaptor.
Contact an electrical parts distributor for assistance in selecting a suitable
0
AC plug adaptor or AC cord set.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
0
Increase the separation between the equipment and receiver.
0
Connect the equipment into an outlet on a circuit different from that to which
0
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
0
FCC Caution:
Any unauthorized changes or modifications to this equipment would void the
0
user's authority to operate this device.
To assure continued compliance, follow the attached installation instructions
0
and use only shielded interface cables with ferrite core when connecting to
computer or peripheral devices.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Supplier's Declaration of Conformity
Trade Name:
Model No.:
Responsible Party: Panasonic Corporation of North America
Support Contact:
4
DVQX2102 (ENG)
Panasonic
DVLC1005Z
Two Riverfront Plaza, Newark, NJ 07102-5490
http://shop.panasonic.com/support

Werbung

loading