Technical Data; General Data - schmersal AZM400Z-ST-1P2P Montage- Und Bedienungsanleitung

The user must evaluate and design the safety chain in accordance with the relevant standards and the required safety
2
level. If multiple safety sensors are involved in the same safety function, the PFH values of the individual components must
be added.
The entire concept of the control system, in which the safety component is integrated, must be validated to the relevant
2
standards.

2.4 Technical Data

Approvals - Standards
Certificates

General data

Standards
Coding
Coding level according to EN ISO 14119
Working principle
Frequency band RFID
Transmitter output RFID, maximum
Housing material
Reaction time, switching off safety outputs via actuator, maximum
Gross weight
General data - Features
Solenoid interlock monitored
Manual release
Short circuit detection
Cross-circuit detection
Safety functions
Integral system diagnostics, status
Number of diagnostic signals
Number of safety contacts
TÜV
cULus
FCC
IC
EN ISO 13849-1
EN ISO 14119
EN IEC 60947-5-3
EN IEC 61508
Universal coding
Low
Magnetic field
RFID
125 kHz
-6 dB/m
Light alloy die-casting
100 ms
764 g
Yes
Yes
Yes
Yes
Yes
Yes
1
2
5-27