Stiga 80-7431 Serie Montageanleitung Seite 13

STIGA Kick Scooter Track 120-S - Art.No. 80-7431-XX
Adjustable height 76-86 cm - PU wheels 120 x 24 mm - ABEC 7 Carbon Bearings
ASSEMBLY
Due to the possible risk of pinching or entrapment while assembling the scooter, adults must
assist children in the initial assembly & adjustment procedure. Keep fingers away from moving
parts and all locking mechanisms during assembly as to not risk pinching or entrapping fingers
and causing injury. Make sure all components are assembled and secured sturdily.
See pictures on page 2
• Loosen the quick release collar (figure A1).
• Pull the release lever (figure A2) and place the front fork to upright position.
• Relocate the release lever (figure B1) and tighten the screw (figure B2) and the quick release
collar (figure C1) properly.
• Assemble the handle bar. Place the screws in the holes according to figure D1. Push down the
screws while tightening the nuts firmly (figure D2).
• Adjust the handlebars to suitable height (make sure the spring button (figure E1) are in locked
position) and tighten the quick release collar (figure E2) properly.
MAINTENANCE
Prior to each use it is important to check that all screws are tightened. Check that the wheels
roll properly and that the bearings are in good condition. If the bearings or other parts are
worn out, replace them with new ones before you use the scooter. To ensure the safety of
the product, only use STIGA original spare parts.
• Please rotate the bearings and wheels to see whether they are workable, and do some
adjustments or add lubricant if it's needed after the first 2 week's use.
• The wheels and wheel bearings may become worn out after regular use and can be changed
easily. Remove the axle bolts with two allen keys and slide the wheel off its fork. Replace new
wheel or wheel bearings, screw in the bolt through aligned fork and wheel, and then tighten
the bolts with two allen keys on each side of the wheels. Acquire the correct wheels or wheel
bearings from the local dealer of this scooter.
• Self-locking nuts and other self-locking fixings may lose their effectiveness over time. If any of
these components are no longer functioning how they should it is strongly recommended that
you discontinue use of the product and seek replacement parts from the dealer or importer of
this product.
• Store the product indoors or under a roof.
ENGLISH
Max user weight
5+
100 KG
13
EN 14619
CLASS A
GB