GLOBBER E-MOTION 6 Benutzerhandbuch Seite 5

2 - TECHNICAL SPECIFICATION
Material
Assembled scooter size
Weight
Minimum user height /
Maximum weight
Maximum speed
Maximum range per charge
Operating temperature
Motor power
Front wheel size
Rear wheel size
Battery capacity (Ah)
Battery voltage
Charger
model no.: JY15-160-060
Charging time
Sealing around compartment
*depending on the user's weight.
Original instructions
3 - ASSEMBLY
- Insert the steering column into the threaded axle; do not tighten the clamp at this stage.
- Align the handlebars with the wheel axle; then, tighten the clamp at the bottom of the threaded axle.
- E-MOTION 6 is provided with an adjustable T-bar that can be adapted to the child's height (2 positions). To adjust the T-bar height,
press the spring-loaded button and move the T-bar to the next slot.
- Make sure that for the lowest position of the T-bar, the button is locked into the lowest hole. Loosen the quick release clamp of the
T-bar when adjusting. Tighten the quick release clamp to secure the T-bar after adjustment.
4 - MODE OF OPERATION AND USE
ON/OFF FUNCTION
- This scooter has a kick-start function.
- To start, push your scooter forward; the side LED lights and battery gauge light will turn on, and you are now in "ON" mode.
- Your E-MOTION 6 will turn off automatically after 1 minute of inactivity; the side LED lights and battery gauge light will turn off.
Steel, aluminium, polypropylene, TPR
L 75.5 x W 32 x H 77.5 - 87.5 cm
4.9 kg
1.1m /
50 kg
Speed mode 1: 6 km/h (3.7 mph)
Speed mode 2: 10 km/h (6.2 mph)
8-10 km*
0-40°C
80 W
4.7" (121mm)
3.5" (90mm)
2.9Ah
14.4V (End-of-discharge voltage : 12 V -
Upper limit of the charging voltage : 16.8 V)
AC input: 100-240V - 50/60HZ – 0.40A
DC output: 16 V 0.6 A
4 Hours
IPX4
ENGLISH
5