Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SetAd:
press MENU again to change address with UP and DOWN. Address flashes to
indicate that it is possible to change it. Confirm new address with MENU.
good:
shows that no errors are detected. Otherwise an error code will be shown, to be
noted and reported when service is effected.
f.125:
manufacturer's software version of the main PCB.
d.pt f:
shows the attached drives: p = pan – t = tilt – f = focus
Hours ↔
↔ xxxxx: (00001 on the shown example), time meter which shows the total time of operation.
↔ ↔
tpxxx:
(tp040 on the shown example), displays the temperature of the main PCB. This is
usually 20°C above ambient temperature.
Pressing MENU one more time will bring you back to the beginning of the menu.
To exit the MENU mode and go back to standard operation, keep the MENU key pressed for 5
seconds or do not press any key for 30 seconds.
Tel. +39 0376 771 777 – fax +39 0376 772 140 – email
Tono Moving User's Manual – 1.0
Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy
8
info@ldr.it
– web www.ldr.it
Werbung
Inhaltsverzeichnis
