Philips AC2882 Benutzerhandbuch Seite 15

Filter type change
1
Touch and
for 3 seconds to enter the filter type
change mode (fig.|).
» Code (A3) of the NanoProtect
filter Series 3 displays on the
screen.
2
Touch to select the filter code of
the new filter you will use (fig.).
3
Touch and hold
confirm the filter code of the new
filter (fig.€).
Note
• After you have selected the filter code
of the new filter using the
if you do not touch any other buttons
in 10 seconds, the appliance will
automatically confirm the filter code of
the new filter.
4
Code (C7) of the Nanoprotect filter
AC displays on the screen after the
first filter type has been changed
(fig.}).
5
Touch to select the new filter
code of the second filter (fig.).
6
Touch and hold
confirm the filter code of the second
filter and exit the filter type change
mode (fig.‚).
Note
• After you have selected the filter code
of the new filter using the
if you do not touch any other buttons
in 10 seconds, the appliance will
automatically confirm the filter code of
the new filter.
12 EN
simultaneously
for 3 seconds to
button,
for 3 seconds to
button,