AEG IKE64450XB Benutzerinformation Seite 118

To activate the function for left / right
cooking zones: touch
change the heat setting touch one of the left /
right control sensors.
To deactivate the function: touch
The cooking zones operate independently.
5.6 Automatic Heat Up
Activate this function to get a desired heat
setting in a shorter time. When it is on, the
zone operates on the highest setting in the
beginning and then continues to cook at the
desired heating setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch (
touch a desired heat setting. After 3 seconds
comes on.
To deactivate the function: change the
heat setting.
5.7 PowerBoost
This function makes more power available to
the induction cooking zones. The function
can be activated for the induction cooking
zone only for a limited period of time. After
this time the induction cooking zone
automatically sets back to the highest heat
setting.
Refer to "Technical data"
chapter.
To activate the function for a cooking
zone: touch .
To deactivate the function: change the
heat setting.
5.8 Timer
• Count Down Timer
You can use this function to set the length of
a single cooking session.
First set the heat setting for the cooking
zone, then set the function.
/ . To set or
/
comes on). Immediately
comes on.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
To activate the function: touch
. timer to set the time (00 - 99 minutes). When
the indicator of the cooking zone starts to
flash, the time counts down.
To see the remaining time: touch
the cooking zone. The indicator of the
cooking zone starts to flash. The display
shows the remaining time.
To change the time: touch
cooking zone. Touch
To deactivate the function: touch
the cooking zone and then touch
remaining time counts down to 00. The
indicator of the cooking zone disappears.
When the countdown ends, an
acoustic signal sounds and 00
flashes. The cooking zone
deactivates.
To stop the sound: touch
• CountUp Timer
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
To activate the function: touch
timer. appears. When the indicator of the
cooking zone starts to flash, the time counts
up. The display switches between
counted time (in minutes).
To see how long the cooking zone
operates: touch
The indicator of the cooking zone starts to
flash. The display shows how long the zone
operates.
To deactivate the function: touch
then touch
cooking zone disappears.
• Minute Minder
to set the
or .
.
to set the cooking zone.
or . The indicator of the
ENGLISH
of the
to set
to set
. The
of the
and the
and
117