Dreame V12 Pro Bedienungsanleitung Seite 23

Care & Maintenance
EN
Cleaning the Smart Multi-Brush Bar
1. Turn the lock counterclockwise until it
stops, then remove the roller brush from
the smart multi-brush bar.
3. When it is dirty, rinse the roller brush
with clean water until it is clean.
18
2. Use scissor to cut off the hairs and fi bers
that get stuck on the brush bar head. Wipe
the dust from the notch and transparent
cover with a dry cloth or paper towel.
Thoroughly dry before use.
4. Stand the roller brush upright for at least
24 hours until it is fully dry.
12
11 1
10 2
24 hrs
9 3
8 4
7 5
6