neato botvac D7 connected Bedienungsanleitung Seite 7

Start Button & LED Lights
HOUSE CLEAN
ACTION
Press Start Button 1x for
house cleaning
Start
Cleaning
Press Start Button 2x for
spot cleaning
Press Start Button during
Pause/
cleaning to pause robot
Resume
Press Start Button again
Cleaning
to resume cleaning
Cancel Press & hold Start Button
Cleaning for 5 seconds to cancel
(When cleaning
Paused)
* NOTE: if LED light is Blinking Red or Solid Red, your robot needs robot maintenance or
your robot has a navigation issue. Please check the troubleshooting section of this guide.
Start Button & LED Lights
and SPOT CLEAN
HOUSE CLEAN LED SPOT CLEAN LED
Solid Blue
Solid Blue
Pulses while paused Pulses while paused in
in House Clean Spot Clean
Solid Blue Solid Blue
Robot & LEDs turn off Robot & LEDs turn off
& robot plays a tone & robot plays a tone
LEDs BATTERY LED
ROBOT IS: LED COLOR
Solid Green
Solid Yellow
Cleaning
Solid Red
Green (Solid
or pulsing)
Pulsing
Charging
Yellow
Pulsing Red
WI-FI LED
LED COLOR
Soft Glowing Blue
Fast Blinking Blue*
Fast Blinking Red
Solid Blue
No Light
*if you've already paired, Fast Blinking Blue means the robot has lost connection. The robot
could be out of range, your Wi-Fi network may be down, or another Wi-Fi issue could have
occurred. If out of range, the robot will automatically reconnect when it comes back within
range. Otherwise, check your router to make sure it's operating normally.
WHAT IT MEANS
Battery level is normal
Battery level is low and must be charged before a new
cleaning can be started
Battery level is low and robot must return to charge base
Battery is charging and robot can start cleaning
Battery is fast-charging and must complete before
cleaning can start
Battery level is low and must be charged before a new
cleaning can be started
WHAT IT MEANS
Robot is in Pairing Mode
Pairing to Neato app/account
Error Connecting
Pairing Successful
Robot Offline – please connect to access additional features
English
5