Maas KCB-H1000 Bedienungsanleitung Seite 7

level) to 05 (the highest level). When the digits corresponding to the level
are flashing, press the or keys to select the desired level.
To confirm the selection, press the SQ/ASQ key or wait 5 seconds.
AM/FM selection
Press the AM/FM/BAND [16] key to switch between AM and FM. The
corresponding icon will appear on the screen.
Note: Not all standards support both types of modulation. If the band you
are in does not support AM or FM, pressing the AM/FM/BAND key will
not produce any change.
Emergency channels (9/19)
Press the EMG/SC [17] key to switch to channel 09. The EMG icon ap-
pears on the screen.
Press the EMG/SC key again to switch to channel 19.
Press the EMG/SC key again to exit Emergency mode. The EMG icon
disappears from the screen.
Key lock
Long press the NRC/LOOK key to activate the key lock function. The
icon appears on the screen. When pressing any key you will hear a war-
ning beep and the icon will blink. All radio's keys are locked, except the
PTT key.
Long press again the NRC/LOOK key to disable the key lock function.
The icon will disappear from the screen.
Channel scan
Long press the EMG/SC [17] key. The SC icon blinks on the screen. The
channel scanning starts immediately.
During scanning, you can press the or key to change the scanning di-
rection. Long press the EMG/SC key or the PTT key to stop scanning.
The SC icon disappears from the screen.
- 7-
EN