Customization And Settings; Getting Started; General Functions; Status Lights - SCHUBERTH SRC SYSTEM PRO Bedienungsanleitung

4. CUSTOMIZATION AND SETTINGS

Get the most out of your SRC-System™ PRO by changing the settings and
customizing your unit according to your own personal preferences.
There are three ways to change the settings: via the Cardo Community on a PC / Mac,
the SmartSet App or from the Settings Menu on your device.
Cardo SmartSet
Community App
Set your Buddy name for 1+8 Intercom
 
Add friends to your Buddy list  
Download the latest firmware upgrade  
Set your Hot-Dial number  
Set the 6 FM radio presets
 
Change the Voice Recognition language  
Disable Spoken Status Announcements  
Change A2DP / Intercom audio priority
 
Change AGC sensitivity for the speakers  
Change VOX Operation Mode  
Change VOX sensitivity for the microphone  
Disable Click-to-Link
 
|
SRCS Pro
28
CARDO COMMUNITY WEB PLATFORM
Visit http://community.cardosystems.com
Settings
Menu

CARDO SMARTSET APP






SETTINGS MENU
The Settings menu is built in to your SRC-System™ and is available in
PRO

several languages.

In Standby, press µ for 2 seconds
Enter Menu

Press µ for 2 seconds
Exit Menu



5. GETTING STARTED

5.1 GENERAL FUNCTIONS

Minimum Requirements:
Power ON / OFF
Windows® XP™ / Mac OS X 10.7
Volume
Mute / Unmute
Battery level indicator
Enter Settings Menu
Hear Your Buddy
Name
Paired Device
Indication
Enable / Disable VOX
(For Intercom / Voice
command calls only)
Enable / Disable
Spoken Status
Announcements

5.2 STATUS LIGHTS

Main unit LED indication
None
Press s for 2 seconds
1 BLUE flash every 3 seconds
• ON: 3 BLUE flashes + ascending tone
• OFF: 3 RED flashes + descending tone 2 BLUE flashes every 3 seconds
+ - 1 RED flash every 3 seconds
Tap or to adjust and set volume of current audio
source
2 RED flashes every 3 seconds
Solid RED
+ -
Tap and simultaneously

5.3 AUDIO SOURCES AND PRIORITIES

+ -
In Standby, press and for 5 seconds
If two connected audio sources try to play audio simultaneously, the
• Blue LED = Full charge
• Purple LED = Half charge SRC-System™ PRO automatically determines which to play through the speakers
• Red LED = Almost empty
based on the priority of the connected devices.
µ
In Standby, press for 2 seconds and follow the spoken
Higher Priority

instructions
s v
In Standby, tap and simultaneously
Lower Priority
In Standby, press s and v for 2 seconds
If "1+8" Buddies are within range, purple LEDs flash for
• Incoming mobile phone calls interrupt ongoing intercom calls
2 seconds
• Incoming intercom calls will interrupt ongoing A2DP music
• Click-to-Link, Intercom and "1+8" calls have the same priority:
+ -
In Standby, press and for 2 seconds
Click-to-Link requests will not interrupt any type of Intercom call in progress, and
• Enabled: Blue flash for 2 seconds
vice-versa
• Disabled: Red flash for 2 seconds
A2DP audio priority can be configured to be higher than Intercom. See section 4 to adjust settings.
µ s
Press and for 2 seconds
Status
SRC-System™ PRO is OFF
Standby mode – No active audio
Active mode – Call in progress / music or
other audio source is ON
Standby mode – Battery is low
Active mode – Battery is low
USB connected / Charging
1. Mobile Phone or GPS instructions *
2. Intercom
3. A2DP (Stereo Bluetooth) audio
4. FM Radio (Built-in)
*GPS instructions from Smartphone GPS Apps are
prioritized like A2DP audio
|
SRCS Pro
29