Werbung
Warning:
Failure to follow these rules may result in serious injury! Using this
machine with respect and caution will considerably lessen the possibility of personal
injury.
Safety rules for the flooring cutter
1.
Read and understand this instruction manual before operating the D-Cut cutter.
2.
If you are not thoroughly familiar with the operation of Flooring Cutter, obtain advice
from a qualified instructor.
3.
Stay alert. Do not operate while under the influence of drugs, alcohol, or medication.
4.
Always wear safety approved eye protection with side shields(ANSI Z87.1)
5.
Keep work area and free of debris.
6.
Keep children and unauthorized persons away from the Flooring Cutter and work area.
7.
Make sure tool is secure. Operate only on a firm substrate or solid stand.
8.
Use the right tool. Do not force the Flooring Cutter or use it for a job for which it was not
designed; use only on approved materials.
9.
Keep Blade sharp. A dull Blade will not perform properly.
10. Always keep hands away from Blade while operating or carrying.
11. Do not alter or misuse this tool. The D-Cut Flooring Cutter is precision built;
modifications not specified in this manual may result in a dangerous condition.
12. Maintain the Flooring Cutter with care. Keep Blade sharp and clean. Follow instructions
for lubricating and changing accessories.
13. Use only recommended accessories. The use of improper accessories may cause
hazards or injury.
14. Never leave the Flooring Cutter unattended. Secure the handle with the Lock chain
when not in use.
15. Warning: The dust generated by cutting certain wood, wood fiber and / or PVC products
can be injurious to your health (but since the Flooring Cutter doesn't create any dust, we
suggest that you don't eat the small chips sometimes created when cutting).
08/2013
Design Cutter MR 630
#72663
5
Werbung
