KLEIBER KS 218-TS Betriebsanleitung Seite 7

2.2 General Safety Notes
The KLEIBER 218 pyrometer has been built in accordance with the currently valid standards of the technology
and the recognized safety regulations and ensures the highest safety level.
The fundamental safety and occupational safety requirements of applicable laws, standards, and guidelines
have been taken into account in the pyrometer design. The safety of the pyrometer is confirmed by the decla-
ration of conformity and the CE mark.
All information related to safety is with reference to the regulations of the European Union currently in force. In
other countries, applicable laws, national directives and safety regulations have to be met.
Apart from the safety instructions given in these operating instructions, you should also take into account the
generally valid regulations for accident prevention and environmental protection as well as the regulations of
the respective professional associations and strictly comply with them.
Note the general safety instructions:
• Commissioning of the pyrometer may only be carried out by persons qualified to do so, taking the safety
instructions into account.
• Pay attention to the installation site requirements and notes for commissioning.
• Only use the original cables provided as accessories for the connection of the pyrometer. Other cables,
especially cables manufactured by yourself, are not permitted.
• Before start-up, carry out a visual inspection for damage to the components of the pyrometer(housing,
optics, cable and pipes). Never operate the pyrometer with damaged components.
3 Scope of Delivery / Accessories
3.1 Scope of Delivery
The scope of delivery of the pyrometer includes:
• Infrared Temperature Switch KLEIBER KS 218 - TS or KG 218 - TS with 3-pin connector
• inspection sheet
• user manual
IMPORTANT:
The connecting cables are not included in scope of delivery. Please order it according to the length
required.
KS 218 - TS KG 218 - TS
3 Scope of Delivery / Accessories
3