Cepex 059073030 Bedienungsanleitung Seite 5

ENGLISH
Cams configuration for 3-way rotary disc valve turning
Resting position - Central Exit
Red
White
Blue x2
230 VAC 50 Hz
24 VAC 60 Hz
External connection
In order to change the turning direction, ask to the manufacturer.
3. Automatic operation
The actuator causes the automatic turn of 90 or 180 degrees of the output axis, depending on the position of the two internal
cams. In addition, it is possible to place the cams so that the stop position is 15 or 30 degrees before or after the position of
closed or opened valve. In order to change the position of the cams, disassemble handle and cover to accede to the cams
and then rise and place them in the new position, matching the grooves of the cams with the positioner of the main axis. It is
recommended that the configuration is to be done by the manufacturer.
Uppper cam
Lower cam
Cam positioner
Switch 1 activated by lower cam
SA SA
Red
SI SI
White
C C
Blue x2
230 VAC 50 Hz
24 VAC 60 Hz
External connection
Upper cam position
90
degrees:
90º position - Right Exit
Switch 1 activated by lower cam
SA SA
Red Red
SI SI
White White
C C
Blue x2 Blue x2
230 VAC 50 Hz 230 VAC 50 Hz
24 VAC 60 Hz 24 VAC 60 Hz
External connection External connection
Upper cam position
5
Switch 2 activated by upper cam Switch 2 activated by upper cam
Lower cam position Lower cam position