Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SAFETY SHUTDOWN
In the event that one or more cooking areas is
inadvertently left on, the safety system will shut the
zones down automatically after a certain time has
elapsed. The letter "H" will be displayed below.
CLEANING AND MAINTENANCE
• Disconnect the appliance from the power supply.
• Do not use steam cleaning equipment.
• Do not use abrasive sponges or scouring pads as
they may damage the glass.
• After each use, clean the hob (when it is cool) to
remove any deposits and stains from food residue.
• Use a scraper only if residues are stuck to the hob.
Follow the scraper manufacturer's instructions to
avoid scratching the glass.
• Sugar or foods with a high sugar content can
TROUBLESHOOTING
PROBLEM
F0
Electronic error
Fc
Electronic control overheated, the cooking
zones are switched off.
Ft / FE
Electronic temperature sensor may be
damaged.
Fb
Excessive key sensitivity.
FU / FJ / FA / FC / Fd
Touchpad error, this error is an automatic
keypad check. It will disappear when the
automatic check is reset to the correct
value.
Fr
Relay error, there may be a problem with
one of the relays.
You can download the safety Instructions, User Manual, Product Fiche and Energy data by:
• Visiting our website - docs.bauknecht.eu
• Using QR code
• Alternatively, contact our After-sales Service (see phone number in the warranty
booklet). When contacting our After-sales Service, please state the codes provided on
your product's identification plate.
POSSIBLE CAUSE
IMPORTANT
To avoid a permanent damage the hob: do not use
pots with bottoms that are not flat; do not use metal
pots with enamelled bottom; do not place hot pots/
pans over the control panel.
damage the hob and must be immediately
removed.
• Salt, sugar and sand could scratch the glass
surface.
• Use a soft cloth, absorbent kitchen paper or a
specific hob cleaner (follow the Manufacturer's
instructions).
• Spills of liquid in the cooking zones can cause the
pots to move or vibrate.
• After cleaning the hob, dry thoroughly.
Disconnect and reconnect the power supply. If the error persists,
call after-sales support.
Wait until the temperature is lowered. The cooking hob will start
working again when the temperature returns to normal.
Wait until temperature is lowered. If the message persists even
after the value returns to room temperature, call the after-sales
support.
Check that the glass-ceramic work top has been installed
properly.
Call after-sales support to make sure that keys touch the glass
surface correctly.
If the error persists, contact the after-sales support.
Disconnect the power supply, wait one minute and switch on
again. If the error persists, call after-sales support.
SOLUTION
Type: XXX
Mod.: XXX
XXXXXXXXXXXXXXXXXXX X
XXXXXXXXXXXXXXX
Made in X
XXXXXXXXXXXXXXXXXXXXX X
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX X
400011357532
Printed in Italy
EN
15
Werbung
