MSI H610TI-S03 Benutzerhandbuch Seite 23

JCONVERT1: FPD Brightness Connector
This connector is used to connect an on/ off switch for the backlight module of the flat
panel display.
BKLT_SEL1: Backlight Inverter Voltage Selection Header
This header allows you to select 12V/19V voltage for backlight module of the panel.
Pin Signal Name
1 L_BKLTEN#
3 BKLT_VCC
5 Ground
7 SEL_UP
1
12V
21
1
Pin Signal Name
2 L_BKLTCTL#
4 BKLT_VCC
6 Ground
8 SEL_DOWN
1
19V