Operation Manual (Removable - Nice Giro Installierungs-Und Gebrauchsanleitungen Und Hinweise

• Before using the automation for the first time, ask the installer
to explain the origin of residual risks and devote a few minutes to
reading this user instruction and warning manual given to you by
the installer. Keep the manual for reference when in doubt and pass
it on to new owners of the automation.
• Your automation is a machine that performs your commands
faithfully; negligent or improper use may make it dangerous: never
activate automation controls if persons, animals or objects are pre-
sent in the operating range.
• Children: An automation system guarantees a high level of safety,
using its detection systems to prevent movement in the presence
of persons or objects, and ensuring constantly foreseeable and safe
activation. Nonetheless, it is advisable to ensure that children do not
play in the vicinity of the automation. To prevent the risk of acci-
dental activation, do not leave the remote controls within the
reach of children. This is not a toy!
• Check the system often, especially cables, springs and sup-
ports, for possible imbalance or signs of wear or damage.
Every month check that the movement motor reverses when the
door touches a 50 mm high object placed on the ground. Do not
use the automation system if repair or adjustment is necessary
because an installation fault or an incorrectly balanced door could
cause injury.
• Malfunctions: if the automation is seen to perform abnormally, dis-
connect the electrical power supply from the system and manually
release the gearmotor. Never attempt to perform repairs; contact
your local installer for assistance. In the meantime the system can
be used as a manual access point, after releasing the gearmotor as
described below in this document.
• Maintenance: As with any machinery your automation needs peri-
odic maintenance so that it may work as long as possible and in
complete safety. Arrange a maintenance schedule with your install-
er with a periodic frequency; Nice advises an intervention every 6
months for normal domestic use, but this period may vary depend-
ing on the intensity of use. Any check, maintenance or repair must
only be carried out by qualified personnel.
• Even if you possess the skills, never modify the system or program-
ming and setting parameters of the automation: this is the respon-
sibility of the installer.
• Testing, periodic maintenance and any repairs must be document-
ed by the person who makes them and the documents stored by
the owner of the system.
The only operation that can be performed by the user and which
we advise you to carry out periodically is the removal of any leaves
or stones which may obstruct the automatism. To stop anyone
from activating the rolling door, before proceeding, remember to
release the automation (as described below) and disconnect
all power sources (including the buffer batteries, if present).
• Disposal: At the end of the automation's lifetime, ensure that it is
disposed by qualified personnel and that the materials are recycled
or scrapped according to current local standards.
• In case of breakage or no power: while waiting for the installer,
or the return of power, the automation may be activated like any
unautomated opening. To do so it is necessary to carry out the
manual release: this operation was designed specifically by Nice to
always ensure the utmost ease of use, without using special tools
or requiring physical effort.
• Releasing the gearmotor:
01. Loosen the lower part of the knob clockwise until you feel a
certain resistance (fig. A);
02. manually open or close the rolling door.
Operation manual
(to be delivered to the end user)
• Locking the gearmotor:
01. Tighten the lower part of the knob anti-clockwise until you feel
a certain resistance (fig. B);
A
B
English – 5