Milnor 60044SP3 Bedienungsanleitung Seite 40

Chapter 3. Routine Maintenance
Figure 14: Compressed Air Mechanisms. These are examples. Your machine can look different.
Air Operated Water Valves -
Milnor Air Cylinder Type
Air Operated Water and
Steam Valves - Angle Type
.
Figure 15: Proximity Switches These are examples. Your machine can look different.
1 Station Press
Typical Proximity Switch
.
Supplement 3
How to Do a Test of Emergency Stop Mechanisms
This test applies to machines that have one or more stop mechanisms in addition to the Stop
0
button ( ). Do this test at the intervals given in the maintenance summary.
Definitions:
3-wire circuit—a series electrical circuit on a Milnor machine that must close before the
machine can operate. If a switch in the circuit opens, machine movement stops and the
operator alarm (a buzzer and a display message) comes on. When you push the start button
1
( ), this closes the 3-wire circuit, which stops the operator alarm and lets the machine
PELLERIN MILNOR CORPORATION
Air Operated Drain Valve -
Milnor Air Cylinder Type
Air Operated Water Valve -
Ball Valve Type
Centrifugal Extractor
→
. Area that must be clean. Remove contamination with a soft
cloth. If the area is hard to touch, use a cloth on the end of a
wood dowel or metal rod. If necessary, use a safe cleaning
agent.
36
Air Operated Band Brake -
Milnor Air Cylinder Type
Legend
1. Factory-set needle valves
to cause two air cylinders
to move together. Do not
adjust.
2. Quick exhaust valves
3. Position indicator.
Yellow when valve is
open.
4. Arrow position indicator
Shuttle Conveyor
Legend